Solar Pool Heating System
So you’ve decided it’s time to install a solar pool heating system but you’re a bit confused about where those hundreds of feet of hose are actually suppose to go. You might be surprised to discover that installation isn’t too difficult as long as you have a plan. When it comes to setting up your solar heating system reliability over the long haul is what’s really important. In order to accomplish this you can’t go cheap. So don’t expect that thin plastic collector to hold up through time and temperature change. Instead spend a little extra and use quality products in the beginning and you will have a system that will last a long time. There are many different designs that can be used to install a system. But one design is commonly used for single pools because it’s simple, easier to install, and very affordable. It uses a bypass valve so that all the water flow doesn’t go through the solar system. The best way to accomplish your solar heater is on the roof of your house. But before you do this you need to check a couple of things with your roof. First you need to check the integrity of your roof and second you need to check for leaks where the installation occurs. Remember this big black pipe will expand and contract with the temperature changes. In fact this occurs at an amazingly fast rate and it must be accounted for during your install. If you have a contractor do the install they consider your roof type and all the elements. If you are planning to do the install yourself you need to take this into consideration. If you have a composition roof with rack mounted installation use a standard rigid polypropylene collector system. Powerstrips are used and they are glued down on the horizontal. Another thing you must consider is aesthetics. You don’t want your solar heating system to be an eye sore. So taking the time to consider your roof line, how much piping you are installing, and where the collectors will go you can help keep things looking good. The collectors are the worst. It can be difficult to find space to hold them. At least to hold ones that are big enough to truly be functional. There is no right or wrong answer to this dilemma. You will just have to work through it. If you are lucky enough to have a flat roof you’ve got the easiest scenario. You will have anywhere from 100 to 200 flow cores per four inch wide collector. The collectors are black and they are cold. As the air warms so will the collectors and the water inside them. If you are going to do your own install it is important that you take some time to learn about plumbing and how the auto controls work. You’ll then need to learn how the sizing works and what you can expect out of the various sizes of collectors. That way you’ll be able to calculate what you need for your pool size. Solar pool heating continues to grow in popularity. If you recognize the value of this type of heating and the money to be saved why not search online for installation instructions?
|
